1. Events

Power Pole Temporary Fix

The missing section was found burnt on the ground. The power company says the ground wire (visible across the gap) was probably arcing to the pole and lit it on fire. They see this happen 3-4 times a year. The main 6 lines are 115kV transmission lines, and the lower 3 are 13.8kV distribution. The 13.8kV lines are on a one-shot breaker, so they only shut down the closer 115kV for this repair. This repair is to stabilize the pole until the entire frame can be replaced in 4 days. Unfortunately I heard about this right before I left work and headed straight over, so I only had my cell phone's camera (N1).
Read More
  • The missing section is near the top of the right pole. Note the left pole is supporting the weight of the crossbar, and bending because of it. The pole is stamped 75ft, and the power company said the crossbars are 30ft and 34ft.

    The missing section is near the top of the right pole. Note the left pole is supporting the weight of the crossbar, and bending because of it. The pole is stamped 75ft, and the power company said the crossbars are 30ft and 34ft.

  • Untitled photo
  • Untitled photo
  • Untitled photo
  • Untitled photo
  • CN truck driving on the rail bed, apparently doing a quick track inspection.

    CN truck driving on the rail bed, apparently doing a quick track inspection.

  • Loading the bucket. The 4x4 posts are to bridge the gap in the pole.

    Loading the bucket. The 4x4 posts are to bridge the gap in the pole.

  • Untitled photo
  • Removing and re-wrapping the climbing belt to get above the cross-brace.

    Removing and re-wrapping the climbing belt to get above the cross-brace.

  • Untitled photo
  • Untitled photo
  • Untitled photo
  • Untitled photo
  • Things at the top don't look so big until you see the worker standing there.

    Things at the top don't look so big until you see the worker standing there.

  • Preparing to attach the grounding jumpers.

    Preparing to attach the grounding jumpers.

  • Untitled video
  • Untitled photo
  • Attaching jumpers between ground and one of the phases.

    Attaching jumpers between ground and one of the phases.

  • Safety features are redundant. Adding a second jumper.

    Safety features are redundant. Adding a second jumper.

  • Untitled photo
  • Untitled photo
  • Tying the two phases together for safety (note the one is already grounded).

    Tying the two phases together for safety (note the one is already grounded).

  • Sprinkler kicked in. Oops.

    Sprinkler kicked in. Oops.

  • Tying the two phases together for safety (note the one is already grounded).

    Tying the two phases together for safety (note the one is already grounded).

  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2023 SmugMug, Inc.
    Attaching jumpers between ground and one of the phases.
    Safety features are redundant. Adding a second jumper.
    2010-05-21 20.27.00.jpg